Carries a balanced analog signal between XLR female and 6.35mm TRS male. The standard cross-connect cable for routing audio interface XLR outputs to TRS-input studio monitors — fully balanced end-to-end despite different connector types.
Connection Endpoints
| End A | XLR (3-pin Balanced Audio) (female) |
|---|---|
| End B | 6.35mm TRS (1/4 inch Audio) (male) |
Specifications
| Protocol | Balanced Analog Audio |
|---|---|
| Max Resolution | N/A |
| Consumer Tier | Studio Balanced Audio |
Supported Features
Balanced Signal
Noise Rejection
Length & Physical
| Max Passive Length | 50m |
|---|
Notes & Compatibility
Confirm both ends use balanced wiring: XLR pin 1 = ground/sleeve, pin 2 = tip (+), pin 3 = ring (-). Mogami, Hosa, or Cable Matters cables are correctly wired. Do not confuse with a simple XLR-to-1/4-inch adapter, which may not be wired for balanced operation.
