Audient iD14 MkII (2020)

A 10-in/6-out desktop interface that connects over USB-C at USB 3.0 (USB 3.2 Gen 1) speeds and is bus-powered. Two Class-A mic preamps sit on combo XLR/TRS inputs, joined by a front JFET instrument DI, four balanced 1/4-inch outputs, and both a 1/4-inch and a 3.5mm headphone jack. A TOSLINK optical input expands the channel count by up to eight via an external ADAT converter. Note there is no 5-pin DIN MIDI on the iD14 MkII.

Device Information

Manufacturer
Audient
Release Year
2020
Model Number
iD14 MKII
Category
Audio Interface

Available Ports

Connector Quantity Power (PD) Capabilities Label Notes
XLR (3-pin Balanced Audio) 2 — — Combo Inputs 1-2 (Mic/Line) XLR legs of the two Class-A mic preamp combo jacks (rear)
6.35mm TRS (1/4 inch Audio) 2 — Same jack Combo Inputs 1-2 (Line) Line/balanced legs of the two combo inputs
6.35mm TRS (1/4 inch Audio) 1 — — Instrument DI (front) Front 1/4-inch JFET Hi-Z instrument input
6.35mm TRS (1/4 inch Audio) 4 — — Monitor/Line Outputs Four balanced 1/4-inch outputs (main monitors + additional line outs)
6.35mm TRS (1/4 inch Audio) 1 — — Headphone Output (1/4-inch, front) Front 1/4-inch headphone output, drives up to 600 ohm
3.5mm TRS (Stereo Audio) 1 — — Headphone Output (3.5mm, front) Second front headphone output on a 3.5mm mini jack
Optical TOSLINK (S/PDIF) 1 — — Optical Input (ADAT/S/PDIF) TOSLINK digital input; ADAT adds up to 8 channels or S/PDIF 2 channels
USB Type-C (USB 3.2 Gen 1) 1 — — USB-C (host) USB 3.0 / USB 3.2 Gen 1; bus-powered

Notes & Compatibility

10-in/6-out USB-C interface (USB 3.0 / USB 3.2 Gen 1; full headphone power requires a USB 3.0 port). The TOSLINK optical input expands input count via ADAT (8 ch) or S/PDIF (2 ch). Two headphone outputs: one 1/4-inch and one 3.5mm. Audient’s specs confirm there’s no 5-pin DIN MIDI on this model.