The AT-LP120XUSB is a direct-drive 3-speed turntable with a switchable built-in phono preamp and a USB output for digitising vinyl. On the back you'll find a detachable stereo RCA output cable plus a ground post for the phono earth wire — the PHONO/LINE switch decides whether those RCAs carry raw phono or RIAA-corrected line-level. The full-size USB Type-B jack runs at USB 1.1 speed and handles 16-bit/44.1 or 48 kHz capture. Power is an external 12V DC barrel supply, not an IEC cord, so the turntable itself has no mains inlet.
Direct-drive 3-speed turntable with switchable phono preamp, stereo RCA output, ground terminal, and USB digitising.
Device Information
- Manufacturer
- Audio-Technica
- Release Year
- 2019
- Model Number
- AT-LP120XUSB
- Category
- turntable
Available Ports
| Connector | Quantity | Label | Notes |
|---|---|---|---|
| RCA Stereo Audio | 1 | RCA OUT (L+R, switchable PHONO/LINE) | Detachable dual-RCA output cable. PHONO mode: 4 mV @ 1kHz/5cm/s. LINE mode: 240 mV, RIAA corrected via built-in preamp. |
| USB Type-B (USB 2.0) | 1 | USB (digitising) | Full-size USB Type-B jack running at USB 1.1 speed. 16-bit / 44.1 or 48 kHz A/D and D/A. Windows 7+ / macOS compatible. |
Notes & Compatibility
PHONO/LINE switch reroutes the single RCA output pair between raw phono (4 mV) and line level (240 mV, RIAA corrected). USB is USB 1.1 speed over a full-size USB Type-B physical connector. Ground screw terminal for turntable earth wire is adjacent to the RCA output — not in the approved connector list; flagged for manual review. External 12V DC barrel power supply is omitted (not in approved connector list, flagged for manual review).
