The AT-LP60X is a fully-automatic belt-drive turntable aimed at first-time vinyl buyers — drop the needle, lift the needle, and change speeds are handled by the deck itself. Its single output is unusual: a 3.5mm stereo mini-jack on the turntable that mates with the supplied 3.5mm-to-dual-RCA cable, switchable between phono (2.5 mV) and line level (150 mV). There is no ground terminal because the tonearm and motor are designed not to require one. Power is a 12V DC external supply, so the deck itself has no IEC mains inlet.
Fully-automatic belt-drive turntable with 3.5mm stereo output and switchable built-in phono preamp.
Device Information
- Manufacturer
- Audio-Technica
- Release Year
- 2019
- Model Number
- AT-LP60X
- Category
- turntable
Available Ports
| Connector | Quantity | Label | Notes |
|---|---|---|---|
| 3.5mm TRS (Stereo Audio) | 1 | Audio OUT (3.5mm, switchable PHONO/LINE) | Stereo mini-jack output. PHONO: 2.5 mV; LINE: 150 mV RIAA-corrected. Included cable adapts to dual RCA. |
Notes & Compatibility
Single stereo output is a 3.5mm TRS jack on the turntable, supplied with a 3.5mm-to-dual-RCA cable. PHONO/LINE slide switch changes output between raw phono (2.5 mV) and line level (150 mV, 36 dB RIAA preamp). No ground terminal by design. External 12V DC barrel power supply is omitted (not in approved connector list, flagged for manual review).
