This wired headset built around dual-chamber 50mm drivers is fully analog and connects through a detachable braided cable that plugs into the left earcup. The main cable ends in a 4-pole 3.5mm plug with in-line audio controls for consoles, phones and single-jack devices, while an included PC extension splits it into separate 3.5mm headphone and microphone plugs. There is no USB or wireless mode, so any device used needs a 3.5mm port.
Device Information
- Manufacturer
- HyperX
- Release Year
- 2017
- Model Number
- HX-HSCA-RD/AM
- Category
- Gaming Headset
Source: manufacturer product page · Last updated: · How we verify port data →
Available Ports
| Connector | Quantity | Power (PD) | Capabilities | Label | Notes |
|---|---|---|---|---|---|
| 3.5mm TRRS (Headset with Mic) | 1 | — | — | Detachable headset cable (4-pole, in-line control) | Single-jack connection for consoles, mobile and controllers |
| 3.5mm TRS (Stereo Audio) | 2 | — | — | PC extension splitter (separate headphone + mic) | Two 3.5mm plugs: one stereo headphone, one microphone |
This device is not in the Cable Finder yet. Browse cables by the ports it has:
Same ports, other brands
Notes & Compatibility
Wired analog only — no USB, no wireless. Detachable braided cable plugs into the left earcup and terminates in a 4-pole (TRRS) 3.5mm plug with in-line volume/mic controls. Included PC extension splits into separate 3.5mm headphone (TRS) and microphone (TRS) plugs. Detachable noise-cancelling boom mic. Lengths: 1.3 m headset cable plus the 2 m PC extension, so the single-jack end on its own is short for a PC tower.