JVC's most affordable native-4K D-ILA laser projector keeps connectivity deliberately simple: two HDMI 2.1 inputs (32Gbps FRL, HDCP 2.3) that accept up to 4K60 with HDR10, HDR10+ and HLG. There's no 4K120 or 8K input here — that stays with the NZ800/NZ900 — and no audio outputs at all, so route sound from your source or an AVR. A LAN port handles IP control (RS-232C and 12V triggers were dropped), and a service USB-A takes firmware updates.
Device Information
- Manufacturer
- JVC
- Release Year
- 2024
- Model Number
- DLA-NZ500
- Category
- Projector
Source: manufacturer product page · Last updated: · How we verify port data →
Available Ports
| Connector | Quantity | Power (PD) | Capabilities | Label | Notes |
|---|---|---|---|---|---|
| HDMI 2.1 (Type A – Standard) | 2 | — | — | HDMI 1 / HDMI 2 | HDMI 2.1 inputs limited to 32Gbps (FRL 8G x4), HDCP 2.3; max 4K60, no 4K120/8K; HDR10, HDR10+, HLG; input only, no eARC |
| RJ-45 (100BASE-TX Fast Ethernet) | 1 | — | — | LAN | 10BASE-T/100BASE-TX; sole wired control interface (TCP/IP external control) and network firmware updates |
| USB Type-A (USB 2.0) | 1 | — | — | SERVICE | Firmware updates and settings backup via USB flash drive only; no media playback |
| IEC C14 (3-Pin Power Inlet) | 1 | — | — | Power input | AC 100-240V 50/60Hz, 280W max; 3-pin C14 inlet confirmed from rear-panel photo |
Notes & Compatibility
Native 4K (4096×2160) D-ILA laser, 2000 lm. Both HDMI inputs are HDMI 2.1 FRL but bandwidth-limited to 32Gbps — max input 4K60, no 4K120/8K (unlike the older NZ7/NZ8/NZ9). HDR10, HDR10+ (certified) and HLG with Frame Adapt HDR Gen2; no Dolby Vision. Inputs only — no speakers, no audio outputs, no eARC. External control is IP-only over LAN: the RS-232C port, 12V screen trigger and 3D synchro port of earlier JVC models were all eliminated (no 3D support). Service USB-A is for firmware/settings only, not media playback. Motorized 1.6x zoom with lens shift (+/-70% V, +/-28% H). US pro-channel sibling: DLA-RS1200. EDID has three modes (Standard, Option1, Option2): if an older AVR, switcher or player won’t show a picture or drops the handshake, try Option1 or Option2 before blaming the cable.