The JVC DLA-NZ700 pairs its native-4K D-ILA laser engine (2300 lm) with the same streamlined I/O as the NZ500: two HDMI 2.1 inputs at 32Gbps (HDCP 2.3) accepting up to 4K60 with HDR10, HDR10+ and HLG. No 4K120, no 8K, no 3D — and no audio outputs, so sound routes through your AVR or soundbar upstream. External control is IP-only over the LAN port (RS-232C and 12V triggers are gone), with a service USB-A for firmware updates.
Device Information
- Manufacturer
- JVC
- Release Year
- 2024
- Model Number
- DLA-NZ700
- Category
- Projector
Source: manufacturer product page · Last updated: · How we verify port data →
Available Ports
| Connector | Quantity | Power (PD) | Capabilities | Label | Notes |
|---|---|---|---|---|---|
| HDMI 2.1 (Type A – Standard) | 2 | — | — | HDMI 1 / HDMI 2 | 32Gbps FRL (not full 48Gbps), HDCP 2.3; max 4K60; HDR10, HDR10+, HLG on both inputs; input only, no eARC |
| RJ-45 (100BASE-TX Fast Ethernet) | 1 | — | — | LAN | 10BASE-T/100BASE-TX per official manual; sole control interface (TCP/IP) |
| USB Type-A (USB 2.0) | 1 | — | — | SERVICE | Firmware updates and settings backup via USB flash drive only; USB generation unpublished, USB 2.0 baseline |
Same ports, other brands
Notes & Compatibility
Native 4K (4096×2160) D-ILA laser, 2300 lm. Both HDMI inputs are 32Gbps FRL with HDCP 2.3, max 4K60 — no 4K120, no 8K, no 3D (no synchro port). HDR10, HDR10+ (certified), HLG with Gen2 Frame Adapt HDR. No RS-232C and no 12V trigger — external control via LAN (TCP/IP) only; rear panel is exactly HDMI 1, HDMI 2, LAN, SERVICE USB plus mains. Detachable power cord (AC 100-240V, 280W); IEC inlet type unconfirmed from documentation, so not modeled. 1.6x motorized zoom, lens shift +/-70% V / +/-28% H. US pro-channel sibling: DLA-RS2200.