Kali Audio LP-6 V2 (2021)

Kali Audio's LP-6 V2 is a 6.5-inch active monitor from the Project Lone Pine line, known for punching well above its price. Each cabinet is self-powered and gives you three rear inputs to cover any source: a balanced 3-pin XLR and a balanced 1/4-inch TRS (both at +4 dBu) for interfaces and mixers, plus an unbalanced RCA pair (-10 dBV) for turntables and consumer gear. A rear DIP-switch array tunes the response to your room and placement. Each speaker in a pair needs its own cable run.

6.5-inch active studio monitor with balanced XLR, balanced 1/4-inch TRS, and unbalanced RCA inputs.

Device Information

Manufacturer
Kali Audio
Release Year
2021
Model Number
LP-6 V2
Category
Studio Monitor

Available Ports

Connector Quantity Power (PD) Capabilities Label Notes
XLR (3-pin Balanced Audio) 1 — — INPUT (XLR, balanced) Rear balanced XLR line input, +4 dBu.
6.35mm TRS (1/4 inch Audio) 1 — — INPUT (1/4" TRS, balanced) Rear balanced 1/4" TRS line input, +4 dBu.
RCA Stereo Audio 1 — — INPUT (RCA, unbalanced) Rear unbalanced RCA stereo line input, -10 dBV.

This device is not in the Cable Finder yet. Browse cables by the ports it has:

Notes & Compatibility

Active near-field monitor; ports are per-cabinet. Three rear inputs: balanced XLR and 1/4″ TRS (+4 dBu) and unbalanced RCA (-10 dBV). Rear DIP-switch boundary EQ and volume trim are controls, not ports. AC mains via IEC inlet (prose).

Common questions

How many ports does the Kali Audio LP-6 V2 (2021) have?

The Kali Audio LP-6 V2 (2021) has 3 ports in total: 1 × XLR (3-pin Balanced Audio), 1 × 6.35mm TRS (1/4 inch Audio) and 1 × RCA Stereo Audio.

Does the Kali Audio LP-6 V2 (2021) have HDMI?

No. The Kali Audio LP-6 V2 (2021) has no HDMI port. No video-capable port is recorded for this device.

Does the Kali Audio LP-6 V2 (2021) have a headphone jack?

No. The Kali Audio LP-6 V2 (2021) has no 3.5 mm headphone jack. It does have a 6.35 mm (1/4-inch) jack: 1 × 6.35mm TRS (1/4 inch Audio).

Cablebabe Goes Disco