Magewell USB Capture HDMI 4K Plus (2018)

A driver-free external HDMI-to-USB capture dongle that accepts up to a 4K (4096×2160) HDMI 2.0 input and captures up to 4K30, appearing instantly as a webcam on Windows, macOS, Linux and Chrome OS. A built-in HDMI loop-through output lets you monitor the source in real time without a separate splitter. It also carries 3.5mm analog audio in and out for embedding or extracting sound. The host link is USB 3.0 over a USB-C connector, and you wire sources with standard HDMI cables.

Device Information

Manufacturer
Magewell
Release Year
2018
Model Number
32090
Category
Capture Card

Available Ports

Connector Quantity Power (PD) Capabilities Label Notes
HDMI 2.0b (Type A – Standard) 1 — — HDMI In Up to 4K (4096×2160) input; capture up to 4K30
HDMI 2.0b (Type A – Standard) 1 — — HDMI Loop-through Out Real-time source monitoring, no added delay
USB Type-C (USB 3.2 Gen 1) 1 — — USB-C (to host) USB 3.0 link to the computer; bus-powered
3.5mm TRS (Stereo Audio) 1 — — Analog Audio In Embed external audio into the capture
3.5mm TRS (Stereo Audio) 1 — — Analog Audio Out Extract embedded audio for monitoring

This device is not in the Cable Finder yet. Browse cables by the ports it has:

Same ports, other brands

Notes & Compatibility

Bus-powered, driver-free (UVC/UAC). HDMI 2.0 input accepts up to 4K (4096×2160), captures up to 4K30. HDMI loop-through output for monitoring. 3.5mm analog audio in and out. Connects via USB 3.0 (USB 3.2 Gen 1) over a USB-C port. The two 3.5mm jacks are separate, per Magewell’s manual: a mic input and a headphone output. Plug a microphone into the mic jack to record voice; the headphone jack monitors the HDMI source or the computer’s playback, since the dongle also shows up as a USB sound card. Loop-through passes up to 4096×2160 4:4:4 at 60fps untouched, so a 4K60 console stays full quality on the TV while the capture itself tops out at 3840x2160p30 or 1920x1080p90. USB 2.0 hosts work, but expect lower frame rates there.