This flagship universal disc player adds balanced analog outputs to the formula. Alongside a main HDMI 2.0 output for 4K HDR and a second HDMI 1.4 audio-only port, it offers coaxial and optical S/PDIF digital outputs plus a stereo analog section on both unbalanced RCA and balanced XLR jacks. Note there is no 5.1/7.1 analog out — the LX800 has no surround decoders, so multichannel audio travels over HDMI only. Two USB 2.0 ports and an Ethernet jack complete the back panel.
Device Information
- Manufacturer
- Pioneer
- Release Year
- 2018
- Model Number
- UDP-LX800
- Category
- UHD Blu-ray Player
Source: manufacturer product page · Last updated: · How we verify port data →
Available Ports
| Connector | Quantity | Power (PD) | Capabilities | Label | Notes |
|---|---|---|---|---|---|
| HDMI 2.0b (Type A – Standard) | 1 | — | — | HDMI MAIN (Audio/Video) | 4K HDR video and audio |
| HDMI 1.4 (Type A – Standard) | 1 | — | — | HDMI SUB (Audio) | Audio-only output to a receiver |
| Coaxial S/PDIF (RCA Digital) | 1 | — | — | DIGITAL COAXIAL OUT | Digital audio output |
| Optical TOSLINK (S/PDIF) | 1 | — | — | DIGITAL OPTICAL OUT | Digital audio output |
| RCA Stereo Audio | 1 | — | — | ANALOG AUDIO OUT (Unbalanced) | Stereo analog line output (unbalanced) |
| XLR (3-pin Balanced Audio) | 2 | — | — | ANALOG AUDIO OUT (Balanced L/R) | Balanced stereo analog output, one XLR per channel |
| USB Type-A (USB 2.0) | 2 | — | — | USB (1 front, 1 rear) | Media playback from USB drives |
| RJ-45 (100BASE-TX Fast Ethernet) | 1 | — | — | LAN (rear) | Wired network for streaming and firmware updates |
This device is not in the Cable Finder yet. Browse cables by the ports it has:
- Cables for HDMI 2.0b (Type A – Standard) 4 cables
- Cables for HDMI 1.4 (Type A – Standard) 9 cables
- Cables for Coaxial S/PDIF (RCA Digital) 1 cable
- Cables for Optical TOSLINK (S/PDIF) 1 cable
- Cables for RCA Stereo Audio 2 cables
- Cables for XLR (3-pin Balanced Audio) 2 cables
- Cables for USB Type-A (USB 2.0) 5 cables
- Cables for RJ-45 (100BASE-TX Fast Ethernet) 1 cable
Notes & Compatibility
Flagship universal player (UHD BD, SACD, DVD-Audio). Main HDMI 2.0 + audio-only HDMI 1.4. Coaxial AND optical digital outputs. Analog audio is STEREO ONLY on both unbalanced RCA and balanced XLR (L+R) — NO 5.1/7.1 analog (no onboard surround decoders; multichannel goes via HDMI). RS-232C control and Zero Signal Terminal kept in prose. IEC mains inlet in prose, not modeled.