The UBP-X800M2 is Sony's audiophile-leaning 4K UHD Blu-ray player and the heavier replacement for the UBP-X800. Like the X700 it uses a TWIN HDMI architecture — main HDMI 2.0a (18 Gbps, HDR10 + Dolby Vision) plus an audio-only HDMI 1.4 for legacy receivers — but it adds CD/SACD playback and a more rigid chassis. A single coaxial S/PDIF digital output is present (no optical), and connectivity is rounded out by a single front USB and 100BASE-TX Fast Ethernet. Power uses an IEC C8 figure-8 detachable cord into the chassis.
Device Information
- Manufacturer
- Sony
- Release Year
- 2019
- Model Number
- UBP-X800M2
- Category
- UHD Blu-ray Player
Source: manufacturer product page · Last updated: · How we verify port data →
Available Ports
| Connector | Quantity | Power (PD) | Capabilities | Label | Notes |
|---|---|---|---|---|---|
| HDMI 2.0b (Type A – Standard) | 1 | — | — | HDMI OUT 1 (Main A/V, rear) | 4K HDR video + audio. 18 Gbps. HDR10 + Dolby Vision (HDR10+ NOT supported). Closest approved tier to spec'd HDMI 2.0a. |
| HDMI 1.4 (Type A – Standard) | 1 | — | — | HDMI OUT 2 (Audio Only, rear) | Audio-only HDMI for legacy AV receivers without 4K HDR passthrough. |
| Coaxial S/PDIF (RCA Digital) | 1 | — | — | Coaxial Digital Audio Out (rear) | Stereo PCM / Dolby Digital / DTS bitstream over a single RCA jack. |
| USB Type-A (USB 2.0) | 1 | — | — | USB 2.0 (front) | Front service / media playback port. |
| RJ-45 (100BASE-TX Fast Ethernet) | 1 | — | — | LAN (rear) | 10/100 BASE-TX wired network for streaming apps, BD-Live, and firmware updates. |
| IEC C8 (Figure-8 Inlet) | 1 | — | — | AC IN (rear) | Detachable 2-prong IEC C7-to-C8 figure-8 mains cable. |
This device is not in the Cable Finder yet. Browse cables by the ports it has:
Notes & Compatibility
TWIN HDMI architecture: HDMI OUT 1 is HDMI 2.0a (18 Gbps, HDR10 + Dolby Vision); HDMI OUT 2 is HDMI 1.4 audio-only for legacy AV receivers without 4K HDR passthrough. Single coaxial S/PDIF; NO optical TOSLINK on this model. NO analog audio outputs (no RCA stereo, no 7.1 RCA, no XLR). Single front USB Type-A 2.0. LAN is 10/100 BASE-TX Fast Ethernet, not Gigabit. Mains is a detachable 2-prong IEC C7-to-C8 figure-8 cord — represented here as IEC C8 (Figure-8 Inlet). Sony lists Dolby Atmos and DTS:X as bitstream out only, so both have to travel over HDMI — the coaxial jack tops out at two-channel PCM and the DD/DTS core. Bluetooth TX with LDAC is on board, so headphones can skip the cable entirely.