This FPGA-based reimagining of the Super Nintendo plays original SNES and Super Famicom cartridges with zero emulation, outputting a clean digital picture over HDMI at up to 1080p60. Its two original-style controller ports accept genuine SNES/SFC pads and accessories, so no adapters are needed on the input side. Power arrives over a Micro USB lead, and a microSD slot handles firmware updates. The single HDMI output is your only video connection, so a good HDMI cable is all most owners need.
FPGA Super Nintendo clone with 1080p HDMI output, two original SNES controller ports, Micro USB power, and a microSD slot.
Device Information
- Manufacturer
- Analogue
- Release Year
- 2018
- Model Number
- Super Nt
- Category
- Gaming Console
Source: manufacturer product page · Last updated: · How we verify port data →
Available Ports
| Connector | Quantity | Power (PD) | Capabilities | Label | Notes |
|---|---|---|---|---|---|
| HDMI 1.4 (Type A – Standard) | 1 | — | — | HDMI Out (rear) | Up to 1080p60; carries 48kHz 16-bit digital audio |
| SNES Controller Port | 2 | — | — | Controller 1 & 2 (front) | Accepts original SNES/SFC controllers and accessories |
| USB Micro-B (USB 2.0) | 1 | — | — | Power (rear) | Power input only |
| MicroSD Card Slot | 1 | — | — | microSD (rear) | Firmware updates and jailbreak/core storage |
Notes & Compatibility
Digital-only FPGA console; HDMI is the sole video output (up to 1080p60, 48kHz 16-bit audio over HDMI). Micro USB port is power only. Cartridge slot is direct-insertion media and is not a cable port.
