Sega's slimmer 1993 redesign of the 16-bit Genesis swaps the Model 1's large 8-pin DIN for a compact 9-pin mini-DIN A/V multi-out that carries composite, RGB and stereo audio through a single cross-shoppable cable. Unlike the Model 1, the Model 2 dropped the built-in RF modulator, so an external RF adapter is required for antenna-only televisions. Two DE-9 controller ports on the front accept standard Genesis/Mega Drive pads. The proprietary barrel power inlet takes a 9V/10V DC brick.
Sega’s 1993 slim 16-bit console with a 9-pin mini-DIN A/V multi-out, two DE-9 controller ports, and no built-in RF modulator.
Device Information
- Manufacturer
- Sega
- Release Year
- 1993
- Model Number
- MK-1631
- Category
- Gaming Console
Available Ports
| Connector | Quantity | Label | Notes |
|---|---|---|---|
| DE-9 (Atari / Sega Joystick Port) | 2 | Control 1 / Control 2 (front) | Standard 9-pin Genesis/Mega Drive controller ports |
Notes & Compatibility
Primary A/V output is Sega’s 9-pin mini-DIN multi-out (composite + RGB + stereo, shared with the 32X, Nomad, CDX and Mega Drive 3) — this connector is NOT in the Cablebabe palette and is described here in prose (candidate palette addition: ‘Sega 9-pin Mini-DIN A/V’). The Model 2 removed the internal RF modulator, so RF requires an external converter fed from the mini-DIN. Cartridge slot and Sega CD edge-expansion connector are direct-insertion/bus interfaces (not modeled). Proprietary 9V/10V DC barrel power inlet (MK-2103 brick) kept in prose.
