This fully automatic belt-drive turntable keeps hookup flexible with a single pair of RCA outputs and a switchable built-in phono preamp, letting it connect to either a phono input or an ordinary line/aux input on a receiver or powered speakers. The preamp PHONO/LINE switch sits underneath the platter, so you lift the mat to change it. A grounding terminal is provided for use when the preamp is bypassed and an external phono stage is used. There are no USB or Bluetooth outputs; it runs from a captive AC power cord.
Fully automatic belt-drive turntable with RCA output and a switchable built-in phono preamp (PHONO/LINE) plus grounding terminal.
Device Information
- Manufacturer
- Denon
- Release Year
- 2010
- Model Number
- DP-300F
- Category
- Turntable
Source: manufacturer product page · Last updated: · How we verify port data →
Available Ports
| Connector | Quantity | Power (PD) | Capabilities | Label | Notes |
|---|---|---|---|---|---|
| RCA Stereo Audio | 1 | — | — | RCA Output L/R | Line/phono output; switchable internal preamp (PHONO bypass for external phono stage). |
This device is not in the Cable Finder yet. Browse cables by the ports it has:
- Cables for RCA Stereo Audio 2 cables
Same ports, other brands
Notes & Compatibility
Single RCA stereo output with a switchable internal phono preamp (PHONO/LINE switch located under the platter). A grounding terminal is present (used when bypassing the preamp) but is not a cable connector — noted in prose. Uses a captive (hardwired) AC power cord, so no mains inlet is modeled. No USB or Bluetooth.
Common questions
How many ports does the Denon DP-300F (2010) have?
The Denon DP-300F (2010) has 1 port: 1 × RCA Stereo Audio.
Does the Denon DP-300F (2010) have HDMI?
No. The Denon DP-300F (2010) has no HDMI port. No video-capable port is recorded for this device.
Does the Denon DP-300F (2010) have a headphone jack?
No. The Denon DP-300F (2010) has no 3.5 mm headphone jack. Its audio connections are 1 × RCA Stereo Audio.
