Video Cables
Cables primarily used for video signal transmission (HDMI, DisplayPort, DVI, VGA).
-
RGB SCART to HDMI Converter (Line Doubler)
This is the good end of the retro-to-modern chain, and the reason all those RGB SCART cables are worth buying. A RetroTINK-2X takes 240p or 480i RGB and line-doubles it to 480p or 720p over HDMI with essentially no added lag, preserving the sharp, stable image the console is actually producing. An OSSC does the…
-
Sega Dreamcast A/V Cable (Composite)
The composite lead Sega put in the box, and the one that does the Dreamcast the least justice. This console was unusual for 1998: it outputs RGB, and it outputs a genuine 480p progressive signal over VGA, which no other console of its generation managed. Running it on composite throws all of that away. The…
-
Sega Dreamcast RGB SCART Cable
Most Dreamcast owners who care about picture quality end up with two cables, and this is the second one. A VGA box handles the large majority of the library at a clean 480p, but a stubborn minority of games — a number of 2D fighters, some PAL releases — will not run in progressive mode…
-
Sega Dreamcast VGA Box
The Dreamcast’s party trick, and still a reason people keep them. In 1998 every other console output 240p or 480i to a television; the Dreamcast could drive a computer monitor at a genuine 640×480 progressive, and it looks it — rock steady, no interlace flicker, no analogue mush. A VGA box is how you get…
-
Sega Genesis Model 2 / 32X A/V Cable (Composite)
Sega changed the A/V connector between Model 1 and Model 2 hardware, and the two are not interchangeable — a Model 2, a 32X or a Nomad needs the 9-pin mini-DIN, while a Model 1 needs the 8-pin DIN. Get that right first, because the plugs look similar in a listing photo. This is the…
-
Sega Genesis Model 2 / 32X Component Video Cable
SCART barely exists outside Europe, which left North American Mega Drive owners with composite and a shrug. HD Retrovision solved it by putting an RGB-to-component transcoder inside the cable’s plug shell: the console still outputs native RGB, the transcoder converts it on the spot, and what reaches the television is component YPbPr that almost any…
-
Sega Genesis Model 2 / 32X RGB SCART Cable
The Mega Drive was built for RGB, and over a decent SCART cable it looks superb — the sharp, saturated picture the Model 2’s composite output has been hiding since 1993. No modification is needed; the RGB lines are already on the 9-pin port. Two things separate a good cable from a bad one here.…
-
Sega Master System / Genesis Model 1 A/V Cable (Composite)
The 8-pin DIN is Sega’s earlier A/V connector, shared by the Master System and the Model 1 Mega Drive, and it is not compatible with the 9-pin mini-DIN that replaced it on the Model 2 — check the console before ordering, because the two get confused constantly in secondhand listings. This is the composite lead,…
-
Sega Master System / Genesis Model 1 RGB SCART Cable
Both of these consoles have been outputting RGB since the day they were built, and almost nobody used it. Over a properly made SCART cable a Master System looks startlingly clean — flat, saturated colour with none of composite’s shimmer — and the Model 1 Mega Drive is generally reckoned to have the better audio…
-
Thunderbolt 3 Cable (USB-C)
The Thunderbolt 3 Cable (USB-C) at 40Gbps supports dual 4K@60Hz displays and 100W power delivery. Critical gotcha: passive cables only hit 40Gbps at 0.5m — longer passive cables drop to 20Gbps. For full speed at longer lengths, use active Thunderbolt 3 cables (up to 100m). Backward compatible with USB 3.2 and USB 2.0 devices.
-
Thunderbolt 4 Cable (USB-C)
The Thunderbolt 4 Cable (USB-C) delivers 40Gbps bandwidth with mandatory DP Alt Mode video, PCIe tunneling, and 100W USB Power Delivery. Intel-certified for dual 4K displays or a single 8K. Every TB4 cable is also a USB4 cable — fully backward compatible. Passive cables max out at 2m at full speed. Requires E-Marker chip.
-
Thunderbolt 5 Cable (USB-C, 80Gbps)
TB5 cables support 80 Gbps bidirectional data and display transfer, with Bandwidth Boost enabling up to 120 Gbps in one direction for high-resolution displays. Passive TB5 cables are limited to approximately 1m. Active optical cables extend to 2-10m at significantly higher cost. Intel certification requires TB5 cables to carry the Thunderbolt logo. Works with Sonnet…
-
USB-C to DisplayPort 1.4 Cable
The USB-C to DisplayPort 1.4 Cable passes native DisplayPort signal from a USB-C port to a DP monitor at 32.4Gbps for 8K@30Hz or 4K@120Hz with DSC. Not a protocol conversion — just a physical adapter since USB-C DP Alt Mode carries native DisplayPort natively. Your USB-C port must support DP Alt Mode. Passive cable, available…
-
USB-C to HDMI Cable (HDMI 2.0, 4K@60Hz)
The USB-C to HDMI Cable (HDMI 2.0, 4K@60Hz) converts USB-C DP Alt Mode to HDMI 2.0 at 18Gbps for 4K@60Hz. The most popular adapter cable for connecting laptops to TVs and monitors. Your USB-C port must support DP Alt Mode (not all do — check your device specs). Active conversion handles the protocol change automatically.
-
USB-C to HDMI Cable (HDMI 2.1, 4K@120Hz)
The USB-C to HDMI Cable (HDMI 2.1, 4K@120Hz) converts USB-C DP Alt Mode to HDMI 2.1 at 48Gbps for 8K@60Hz or 4K@120Hz. Active conversion cable — your laptop must support DP Alt Mode output. The premium option for connecting modern laptops to gaming TVs and 4K@120Hz displays. Typically limited to 2-3m length due to active…
-
USB-C to USB-C Cable (USB4 40Gbps)
The USB-C to USB-C Cable (USB4 40Gbps) at 40Gbps carries data, video (DP Alt Mode for 8K@30Hz), and up to 240W charging through a single cable. Requires E-Marker chip. Short max passive length (0.8m) — this is a performance cable, not a long-run solution. Backward compatible with all USB 3.x and USB 2.0 devices.
-
VGA Cable (D-Sub 15)
The VGA Cable (D-Sub 15) carries analog video up to 2048×1536 — with increasing quality loss at higher resolutions. The D-Sub 15 connector has been around since 1987. Still used on projectors and legacy enterprise monitors. Video only, no audio. For anything modern, use HDMI or DisplayPort instead.
