Devices
Latest devices
-
PreSonus Eris E3.5 (2018)
PreSonus’s Eris E3.5 is a compact 3.5-inch active desktop monitor aimed at media and entry-level production, and it’s the most input-flexible speaker in this group. The left (active) cabinet carries rear balanced 1/4-inch TRS inputs and unbalanced RCA inputs, a front 3.5mm aux input for phones and laptops, and a front 3.5mm headphone output that…
-
PreSonus Eris E5 BT (2020)
These active near-field studio monitors give you three wired ways in plus Bluetooth 5.0, so the same pair can sit on a mixing desk or a living-room shelf. The rear panel carries balanced 1/4-inch TRS inputs for an audio interface and unbalanced RCA inputs for a turntable or consumer source, while a front 1/8-inch aux…
-
PreSonus Studio 24c (2019)
PreSonus’s compact 2-in/2-out interface connects over USB-C (USB 2.0 audio class) and is bus-powered, so it needs no wall adapter. Its two combo inputs each take an XLR microphone plug or a 6.35mm (1/4-inch) line or instrument cable, driven by XMAX-L mic preamps with switchable 48V phantom power. You get a pair of balanced 6.35mm…
-
PreSonus Studio 68c (2019)
A 6-in/6-out USB-C interface built around four XMAX Class-A mic preamps, with combo XLR/TRS inputs that record mics, line sources, and instruments at up to 24-bit/192kHz. Beyond the analog I/O it adds RCA coaxial S/PDIF and 5-pin DIN MIDI through an included breakout cable, plus a 1/4-inch headphone output with Cue Mix A/B source switching.…
-
Pro-Ject Debut Carbon EVO (2020)
The Debut Carbon EVO is an entry-audiophile turntable built around an 8.6-inch carbon-fibre tonearm and a factory-fitted Sumiko Rainier MM cartridge. Its rear panel offers a fixed MM phono-level RCA output with a dedicated ground lug — no built-in preamp and no line-level switch, so the receiver or amplifier side must provide phono input or…
-
Pro-Ject Debut PRO (2021)
This audiophile belt-drive turntable keeps things purely analog: a pair of gold-plated RCA jacks carries a phono-level signal to your hi-fi, paired with a separate ground terminal to eliminate hum. There is no built-in preamp, so you need an external MM phono stage or a receiver with a dedicated phono input. No USB or Bluetooth…
-
QNAP TBS-h574TX (2023)
QNAP’s TBS-h574TX is a Thunderbolt 4 ‘NASbook’ with five hot-swappable E1.S/M.2 flash bays, and it is the port-richest NAS in its class. Networking mixes one 10GbE and one 2.5GbE RJ-45 port, while two Thunderbolt 4 ports enable 40Gbps direct-attach editing from a Mac or PC. An HDMI 1.4b output handles 4K at 30Hz for monitoring.…
-
QNAP TS-233 (2021)
An entry-level 2-bay ARM NAS built for simple home backup and media storage. Networking is a single Gigabit Ethernet port: there is no 2.5GbE and no HDMI on this model, though a USB-to-5GbE adapter can be added. For storage and accessories it offers one USB 3.2 Gen 1 Type-A port at 5 Gbps plus two…
-
QNAP TS-264 (2022)
The QNAP TS-264 is a 2-bay desktop NAS built around an Intel Celeron N5095 quad-core CPU and 8GB DDR4, supporting two 3.5″/2.5″ SATA drives plus two internal M.2 2280 PCIe Gen3 x1 slots for SSD caching or storage pools. Networking steps up from Gigabit with dual 2.5GbE RJ-45 ports supporting Port Trunking for up to…
-
QNAP TS-451D2 (2021)
QNAP’s four-bay TS-451D2 is built around multimedia output: a single HDMI 2.0 port drives a 4K@60Hz display directly from the NAS for HD Station and Linux Station. Networking is handled by two Gigabit Ethernet jacks (bondable via Link Aggregation), and there are four USB 3.2 Gen 1 (5 Gbps) Type-A ports — one on the…
-
QNAP TS-453D (2020)
A 4-bay Intel Celeron NAS aimed at users ready to move past Gigabit: it has two 2.5GbE RJ-45 ports that trunk to 5 Gbps and run over ordinary CAT5e cabling. An HDMI 2.0 output drives 4K@60Hz for local media playback and HD transcoding. Connectivity rounds out with three USB 3.2 Gen 1 Type-A ports (5…
-
QNAP TS-462 (2022)
QNAP’s four-bay TS-462 steps up networking to a single 2.5GbE port (2.5G/1G/100M auto-negotiating) and keeps an HDMI 2.0 output for 4K@60Hz direct display. Its USB layout splits speeds: two USB 3.2 Gen 2 (10 Gbps) Type-A ports for fast external storage plus two USB 2.0 ports for peripherals. A PCIe Gen3 x2 slot lets you…
-
QNAP TS-464 (2022)
The QNAP TS-464 is the 4-bay sibling of the TS-264, stepping up to an Intel Celeron N5095 quad-core CPU with 8GB DDR4 and four 3.5″/2.5″ SATA bays alongside two internal M.2 2280 PCIe Gen3 x1 slots for SSD caching. A PCIe Gen3 x2 expansion slot accepts QNAP network, M.2, or graphics cards, while dual 2.5GbE…
-
Raspberry Pi 5 (2023)
Two Micro HDMI ports allow the Raspberry Pi 5 to drive dual 4K@60Hz displays simultaneously — a notable upgrade from the Pi 4’s single-display limitations. The USB-C port is power-only at USB 2.0 speeds; a 5V/5A supply is required for full performance and it cannot output DisplayPort video. Four USB-A ports split into two USB…
-
Raspberry Pi 500 (2024)
A Raspberry Pi 5 folded into a keyboard, this one drives two 4Kp60 displays — but both video outputs are Micro HDMI (Type D), not full-size, so you need micro-HDMI-to-HDMI cables or adapters from day one. Its USB-C socket carries power only: 5V at up to 5A from the official 27W supply, with no data…
-
Razer Barracuda Pro (2022)
Razer’s flagship dual-wireless headset combines low-latency 2.4GHz gaming via a bundled USB-C dongle with Bluetooth for mobile, adding hybrid ANC and THX AAA tuning on TriForce Bio-cellulose drivers. Unlike the cheaper Barracuda X, the Pro drops the 3.5mm headphone jack entirely, so the headset’s only physical cable port is the USB-C connector used for charging.…
-
Razer BlackShark V2 Pro (2023)
Razer’s 2023 refresh of its esports-favorite BlackShark V2 Pro pushes wireless battery life past 70 hours and adds Bluetooth 5.2 alongside the existing 2.4GHz HyperSpeed link, but it controversially drops the 3.5mm wired jack that the 2020 original offered. Connectivity is now strictly wireless: a USB-A 2.4GHz dongle for game audio and Bluetooth for phone/secondary…
-
Razer Blade 14 (2024)
Razer’s ultra-slim 14-inch gaming laptop runs on AMD Ryzen 9 8945HS and delivers premium connectivity without Thunderbolt — the AMD platform uses USB4 instead. Two USB4 Type-C ports each support DisplayPort Alt Mode and 100W Power Delivery for charging. Full-size HDMI 2.1 outputs up to 4K at high refresh rates for gaming monitors. There is…
-
Razer Blade 15 (2023)
Razer’s 15-inch gaming ultrabook features two Thunderbolt 4 ports at 40Gbps, integrated HDMI 2.1, and three USB-A 3.2 Gen 2 ports for gaming peripheral support. The HDMI 2.1 connection drives 4K@120Hz or 1440p@240Hz for competitive gaming displays without adapters. Both TB4 ports take 100W USB Power Delivery charging and carry video from the integrated GPU.…
-
Razer Blade 16 (2024)
The 2024 Razer Blade 16 is built around an Intel Core i9-14900HX and an NVIDIA RTX 40-series GPU inside a CNC-aluminium 16-inch OLED chassis. Port layout splits evenly across both sides: one Thunderbolt 4 USB-C and one USB-C 3.2 Gen 2, each rated for 100 W USB-C Power Delivery, plus HDMI 2.1 for external displays…
-
Razer Blade 16 (2025)
Razer’s slimmed-down 16-inch gaming laptop keeps a full spread of ports for a thin-and-light. It has two USB4 Type-C ports (40 Gb/s) with DisplayPort 1.4 and 100W charging, one on each side, plus three USB 3.2 Gen 2 Type-A ports for mice, drives and dongles. A full-size HDMI 2.1 port drives high-refresh external panels, and…
-
Razer Core X (2018)
A Thunderbolt 3 external GPU enclosure that connects to a laptop over a single USB-C cable, turning a thin notebook into a desktop-class graphics machine. That one Thunderbolt 3 link carries the GPU data and delivers up to 100W of USB-C power back to the laptop to charge it while docked. Unlike the Core X…
-
Razer Core X Chroma (2019)
This Thunderbolt 3 enclosure adds a desktop graphics card to a laptop over a single cable, while its dual-chip design also drives a built-in hub. Beyond the GPU it offers four USB 3.1 Type-A ports and Gigabit Ethernet, turning one Thunderbolt connection into a full docking station. The TB3 link delivers up to 100W of…
-
Razer Core X V2 (2025)
The Razer Core X V2 is Razer’s first Thunderbolt 5 external graphics enclosure, designed for 4-slot-wide NVIDIA or AMD desktop graphics cards over a single 80 Gbps TB5 connection. Unlike the original Core X series, the V2 ships without an included power supply and without an integrated USB/Ethernet hub — users install a standard ATX…
